Deadline: 30-Mar-22
The European Commission (EC) is offering Grants for Advanced lightweight materials for energy efficient structures.
A step change is needed to develop new sustainable and high performance lightweight materials and associated novel manufacturing techniques which comply with industrial demands for quality and reliability. Research areas to be addressed include:
- Development of new chemistries for fast curing resins (including bioresins) and associated novel production techniques (e.g. out-of-autoclave processes to reduce energy consumption);
- Utilisation of existing or development of cost competitive renewable resins and/or core materials in combination with new fibres to make all renewable lightweight composites and structures;
- Technologies and material design paradigms that enable hybrid composites based on a variety of constituents e.g. combinations of virgin and recycled fibres, bio-fibres including appropriate fibre coatings, etc. towards maximum cost and environmental benefits with a life-cycle perspective;
- High performance high temperature polymer composites with potential to extended use at temperatures above 300C. Besides general material and manufacturing, the long-term durability of materials in service is a potential are of research and development;
- New multifunctional composites where the materials and structures, besides traditional structural capacity, also is optimized towards one or several other functions such as thermal management (heating/cooling), energy harvesting and storage, morphing, self-monitoring, etc.;
- New recycling technologies for polymer composites structures and, in particular, composite constituents. The high value constituents e.g. carbon fibres or matrix are not easily separated and technologies to recycle both in the same process should be addressed.
Funding Information
The check will normally be done for the coordinator if the requested grant amount is equal to or greater than EUR 500 000, except for:
- public bodies (entities established as a public body under national law, including local, regional or national authorities) or international organisations; and
- cases where the individual requested grant amount is not more than EUR 60 000 (lowvalue grant).
Expected Outcomes
The positive environmental impact of lightweight composite materials most often occur due to benefits during the use-phase. The overall life-cycle benefits are often reduced as a consequence of negative environmental impacts associated with the manufacturing (energy consumption) and inherent challenges to regain the high-value components (fibre and matrix) at industrial scale. Development of new chemistries for fast curing resins, new bio-based composites (including fibres and core materials), joining technologies between composites and other materials and associated novel production techniques are expected to result in:
- Reduced cost for production of renewable lightweight materials, 25 % lower cost than currently used materials;
- Light-weight products containing >50% sustainable, bio-based materials;
- Up to 30% lightweight potential through tailored functionality for a range of extreme environment (energy, infrastructures, aeronautics, space) applications and in surface transport;
- Reduction in CO2 emissions (LCA) of at least 20 %;
- Business models and circular value chains for lightweight bio based components;
- Improved time-to-market for European providers of lightweight solutions.
Eligibility Criteria
To be eligible for funding, applicants must be established in one of the eligible countries, i.e.:
- the Member States of the European Union, including their outermost regions;
- the Overseas Countries and Territories (OCTs) linked to the Member States;
- eligible non-EU countries:
- countries associated to Horizon Europe;
- low- and middle-income countries.
For more information, visit https://bit.ly/3AwanRq